收藏本站
MAX3541/MAX3542 Evaluation Kits
Component Suppliers
SUPPLIER
AVX Corporation
Citizen America Corp.
EPCOS AG
Johnson Components
Keystone Electronics Corp.
Murata Electronics North America, Inc.
ROHM Co., Ltd.
Sullins Electronics Corp.
Texas Instruments Inc.
TOKO America, Inc.
PHONE
843-946-0238
310-781-1460
732-906-4300
507-833-8822
209-796-2032
770-436-1300
858-625-3630
760-744-0125
972-644-5580
847-297-0070
WEBSITE
www.avxcorp.com
www.citizencrystal.com
www.epcos.com
www.johnsoncomponents.com
www.keyelco.com
www.murata-northamerican.com
www.rohm.com
www.sullinselectronics.com
www.ti.com
www.tokoam.com
Note: Indicate that you are using the MAX3541/MAX3542 when contacting these component suppliers.
Quick Start
Required Equipment
Connections and Setup
This section provides a step-by-step guide to testing
the basic functionality of the EV kits in UHF mode.
?
One power supply capable of supplying at least
500mA at +3.3V
Caution: Do not turn on DC power or RF signal gen-
erators until all connections are completed.
?
?
?
?
?
?
?
?
?
One dual-output power supply capable of supply-
ing up to 3V at least 5mA (to apply gain control
voltages)
One RF signal generator capable of delivering at
least 0dBm of output power at frequency.
(HP 8482A or equivalent)
One RF spectrum analyzer capable of covering the
operating frequency range of the device.
A PC (486DX33 or better) with Windows ? 95/98,
2000, NT 4.0, XP or later operating system, 64MB
of memory, and an available parallel port
One 25-pin parallel cable
50 Ω SMA cables
(Optional) One multichannel digital oscilloscope
(Optional) A network analyzer to measure return loss
(Optional) An ammeter to measure supply current
1)
2)
3)
4)
5)
Verify that the JP1 and JP6 shunts are removed,
the JP2 shunt is installed, and JP11 and JP12 have
shunts across pins 1-2.
With its output disabled, set the DC power supply
to +3.3V. Connect the power supply to the V CC
(through an ammeter if desired) and GND termi-
nals on the EV kits. If available, set the current limit
to 500mA.
With its output disabled, set both outputs of the
dual-output DC power-supply voltages to +3V.
Connect one of the outputs to the TP1 connector
and the other output to the IF_AGC connector.
With its output disabled, set the RF signal genera-
tor to a 50.5MHz frequency and a -80dBm power
level. Connect the output of the RF signal genera-
tor to the SMA connector labeled RFIN on the eval-
uation board.
Connect a 25-pin parallel cable between the PC’s
parallel port and the MAX3541/MAX3542 evalua-
tion board.
6)
Turn on the +3.3V V CC power supply, followed by
the +3V dual-output gain-control power supply.
The supply current from the +3.3V V CC supply
should read approximately 230mA. Be sure to
adjust the power supply to account for any voltage
drop across the ammeter.
Windows is a registered trademark of Microsoft Corp.
_______________________________________________________________________________________
3
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
MAX3543EVKIT+ EVAL KIT MAX3543
MAX3558EVKIT EVAL KIT MAX3558
MAX4000EUA+T IC CNTRLR RF-DETECT 8-MSOP
MAX4001EVKIT EVAL KIT FOR MAX4001
MAX4003EUA+T IC LOG AMP RF DETECT 45DB 8-MSOP
MAX44007EDT+T SENSOR AMBIENT LIGHT 6UTDFN
MAX44009EDT+T SENSOR AMBIENT LIGHT 6UTDFN
MAX4473EUA+T IC AMP PA PWR GSM CONTROL 8-MSOP
相关代理商/技术参数
MAX3543CTL+ 功能描述:调谐器 Broadband Analog & Digital TV Tuner RoHS:否 制造商:NXP Semiconductors 功能: 噪声系数: 工作电源电压: 最小工作温度: 最大工作温度:
MAX3543CTL+T 功能描述:调谐器 Broadband Analog & Digital TV Tuner RoHS:否 制造商:NXP Semiconductors 功能: 噪声系数: 工作电源电压: 最小工作温度: 最大工作温度:
MAX3543EVKIT+ 功能描述:射频开发工具 MAX3542/3 Eval Kit RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V
MAX3544CTL+ 制造商:Maxim Integrated Products 功能描述:EVKIT FOR DIGITAL TV TUNER - Rail/Tube
MAX3544CTL+T 制造商:Maxim Integrated Products 功能描述:MULTIBAND DIGITAL TELEVISION TUNER - Tape and Reel
MAX354C/D 功能描述:多路器开关 IC RoHS:否 制造商:Texas Instruments 通道数量:1 开关数量:4 开启电阻（最大值）:7 Ohms 开启时间（最大值）: 关闭时间（最大值）: 传播延迟时间:0.25 ns 工作电源电压:2.3 V to 3.6 V 工作电源电流: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UQFN-16
MAX354CPE 功能描述:多路器开关 IC 8:1 Fault-Protected Analog MUX RoHS:否 制造商:Texas Instruments 通道数量:1 开关数量:4 开启电阻（最大值）:7 Ohms 开启时间（最大值）: 关闭时间（最大值）: 传播延迟时间:0.25 ns 工作电源电压:2.3 V to 3.6 V 工作电源电流: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UQFN-16
MAX354CPE+ 功能描述:多路器开关 IC 8:1 Fault-Protected Analog MUX RoHS:否 制造商:Texas Instruments 通道数量:1 开关数量:4 开启电阻（最大值）:7 Ohms 开启时间（最大值）: 关闭时间（最大值）: 传播延迟时间:0.25 ns 工作电源电压:2.3 V to 3.6 V 工作电源电流: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UQFN-16